The "Double" bannerstand duplicates the advertising space and range without requiring more space. This retractable bannerstand presents your advertising messages on two sides so it is perfect to be placed in the middle of your booth stand or on events with public coming from more than one direction.
We will print according to your custom file, the banner is clamped on the upper bar and tightened by a spring mechanism inside the aluminum base. Included in the offer is a padded bag for a safe storage and transport when the prints are rolled into the base.
Technical details
?
Set up
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and can also be found in our data sheet.
Set up in
1-2 minutes
Standing size
Standing size WxHxD 33x78": approx. 34x82x23"
Closed size app. 34x6x4"
The rod is a 3-part folding rod and not height-adjustable.
Printing measurements
Two prints each:
33x78", 39x78"
Print quality
Digital print CMYK, UV stable, 720dpi (file resolution max. 150dpi)
?
Fire Safety Class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
Print media
Without B1: Displayfilm polypropylene - polyester composite 0.03 lb/ft² , gray backside, front satined surface, scratch resistant
With B1: Polyester 0.05lb/ft², gray backside, BlockOut, scratch resistant, B1 (fire protection)
The appearance and structure of textiles (such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the fabric (knots) may result. Please note that they won't be seen considering a viewing distance of 19".
?
Storage
Please always store and transport your RollUp "Double" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your RollUp regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up some time it will be smooth again.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
Material
The cassette is made of anodized aluminum with silver aluminum caps on the sides. The rotable base foot in the middle is made of metal.
good to know
Cartridge feed
To avoid damages of the print please pull the prints straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
Maintenance
The print surface can be cleaned detergent-free with a soft cloth and water.
Weight per unit: 14.33 lb
Shipping costs:
click here