Do you need help bringing your printing idea to life?

Foil plot, individually cut out letters and graphics with transfer foil for many applications, for outside and inside.

Foil plot, individually cut out letters and graphics for many applications. Supplied on backing sheet as one unit per colour. Very well suited for short and medium-term inscriptions, markings and decorations indoors and outdoors. Can be kept almost indefinitely indoors.

Please order a separate position for each color in your graphic, with the corresponding dimensions.

Technical details

Application

Indoors and outdoors on flat surfaces.

No recommendation for gluing on natural stones (marble, granite, etc.) possible discolouration.

Assembly

The plot (cut) is based on the file you provide (technical implementation must be guaranteed).

Print dimensions

Max. cutting width: 1.45m (short side)
Max. cutting length: 50 m (long side)

From a width of the short side of 1.45m and a maximum length of 30m, rectangular and foils with cut contours are divided. Up to this value they are each produced in one piece.

Print quality

No print, processing with cutting plotter

Packaging, storage

Store dry, flat or rolled up, 2 years

Material

Orafol 651, special PVC film with a glossy surface.

Covering material: Silicone cardboard coated on one side, 137g/m².

Durability

With professional processing
black and white 5 years, colored 4 years, brilliant blue 3 years

Adhesive

Solvent polyacrylate, permanent

Good to know

Assembly

On smooth, level surfaces.

We recommend (not binding) that a partial foil covering up to a maximum of 50% of the glass surface be applied by specialist personnel. Full gluing on laminated glass must not be carried out, as this can lead to glass breakage. Please contact us if you have any questions.

We pass on the important information from the manufacturer. This is as follows: "Caution: The surface to be glued must be free of dust, grease or other contaminants that could impair the adhesive strength of the material. New paintwork must be dry or fully cured for at least three weeks. Application tests with the intended paints. Furthermore, the processing instructions issued by ORAFOL must be observed. The basis for the information is our knowledge and practical experience. Due to the variety of possible influences during processing and use, we recommend that you conduct your own tests on our products for special applications A legally binding assurance of certain properties cannot be derived from our information."

Maintenance

The foil plot can be wiped off with a slightly damp cloth without aggressive cleaning agents.