Stickers "Standard" in your desired size incl. print - with laminate - 24h express - contour cut possible - indoor and outdoor
Technical details
Used for
Indoor and outdoor
Manufacturing
We will cut to the ordered size.
Contour cut is possible, please request charge
(depending on quantity) in advance.
Printing measurements
Max. printing height: 1.1m (shortest side)
Max. printing width: 30m (longest
side)
The max. printing width for a rectangular motif and stickers with a cut contour is 1.1m. Up to
these values the stickers are produced in one piece. All larger dimensions will be divided according to our data
sheet.
Print quality
Digital print, CMYK latex (scratch resistant), 600x600dpi, file resolution max. 150dpi
Print media
Calendered 100µm PVC foil with a white backside with permanent adhesive polyacrylate
and 85µm protective laminate.
Bleed
To create your printing motif or for special use please see our artwork guideline.
Durability
Indoor: up to three years
Outdoor: depends on intensity of solar radiation and place of
installation: in average one year, in maximum two years. In extreme cases, e.g. installation on a flat roof, one
year.
good to know
Kiss cut / die cut
Contour cut is possible, please request charge (depending on quantity) in advance.
Minimum size
The minimum size per piece is 0.5m². Even if the
selection is possible in the shop, please contact us in advance for smaller sizes.
Mounting
We recommend to apply the adhesive foil by experts and a partial application up to max. 50%
of the glass surface. When the sticker foil is applied completly on a glass pane you cause a risk of fracture!
If you have any questions please feel free to contact us.
Maintenance
The print surface can be cleaned detergent-free with a soft cloth and water.
?
Double cut and sheet transition
Your oversized motif will be delivered devided with a 5mm overlap.
For seamless result, you may decide to double cut your foil mural.
1. Take one piece of
your foil and place it.
2. Place the second piece and apply it seamless on the other.
3.
Now you can make a single straight razor line in the middle of the 2 overlapping panels.
4.
Peel away the excess paper carefully and gently smoot the cutted area and the underground.
Sheet transition
For large, divided motifs with 5mm overlap for a double cut.
IMPORTANT
If you wish a division at a particular position, please create the data in seperate segments with 5mm
overlap at the cutting position and additional 3mm bleed at all sides.
If we do not have any other
information, the sticker will be divided by us automatically. It will be delivered in individual parts with
standardly 5mm overlap.
Files with contour cut that exceeds the max. width must already be divided
by you and created with bleed and overlap.
Colour deviation
If color accuracy is of high priority, we recommend a proof / preprint. The proof we will
print on an 1:1 cutout in size DIN A3 on the original material. This allows you to counteract color variations
and adjust them in your file if necessary.
"Standard" - Stickers on self-adhesive foil in custom size. Printed with 4/0 CMYK. Also available with laminate and
contour cut. The durability averages three years. Usable for indoor and outdoor.