The Roll-Up "Expo Double" is a double-sided banner. With high quality print. Both prints are hooked into on rod
Technical details
?
Set up
The set up is also possible for inexperienced users within a short time
without further tools. The rollup is delivered ready assembled. A neutral instruction manual is
included in the RollUp and in our data sheet.
Set up in
ca. 1 minute
Standing size
WxHxD for size 56x220cm app. 63x225x23cm
The rod is a folding rod included with a
telescobic bar.
Closed size app. 63x8x23cm
Printing measurements
two pieces:
56x220cm, 83x220cm, 96x220cm, 116x220cm
Print quality
Digital print CMYK, UV stable, 720dpi (file resolution max. 150dpi)
Print media
without B1: 215µ/m² polypropylene (opaque), grey backside, with matt
protective laminate (scratch resistant)
with B1: Polyester 290 g/m², grey backside,
BlockOut,
scratch resistant, B1 (fire protection)
The appearance and workmanship of textiles
(such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the
fabric (knots) may be the result. Please note that they won't be seen considering a viewing distance of 50cm.
?
Storage
Please always store and transport your RollUp "Expo Double" in the carrying
bag and cardboard box to prevent bumps and scratches. Set up your printed banner display regularly,
approximately every 3 months for a few hours. If the material is rolled for too long, it will curl
backwards at the sides. If it is built up sometimes it will keep smooth.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could
liquefy and loose the adhesive strenght.
Material
The cassette is made of anodized aluminum with silver caps on the sides.
Bleed
Please create your print data without trim, bleed and crop marks. You will find all
information in our data sheet.
good to know
Cartridge feed
Please be careful with the digital print while rolling down. The digital print should not rub
against the side caps. Otherwise the print could be damaged.
Maintenance
Wipe the print surface with a soft cloth and water, please do not use detergents.
Colour deviation
If the color compatibility is a high priority, please order a proof. This allows you to
counteract color variations and customize them in your file.
The RollUp "Expo Double" has a maximum height of 225cm for the visible printed motif. The banner display has a
folding bar
with an included telescopic part in the middle of the system. Both banners will be hooked on one rod.
The
double-sided retractable banner stand comes with a sturdy black padded carrying bag.